Tube Fabricating

Cutters

for

Metal

   
TC-1550 HI-DUTYฎ METAL TUBING CUTTER
For hard or soft copper, aluminum, brass, thin wall
steel, stainless steel, monel, titanium and other tubing.
For 1/8" to 1-1/8" (4 mm to 28 mm) O.D. tubing
HI-DUTYฎ METAL TUBING CUTTERS

For 1/8” to 1-1/8” and 1/4” to 1-5/8” O.D. tubing.
 

JUNIOR METAL TUBING CUTTERS

For 1/8” to 3/4” (4 mm to 19 mm) O.D. tubing.  227-FA Includes S32633 general purpose cutter wheel. Swing radius 2”.
Length 3-1/2”. Wt. 5.0 oz

 

“IMP”ฎ MINI  METAL TUBING CUTTERS

For 1/8” to 5/8”, 3/16” to 7/8” and 1/8” to 1-1/8” O.D. tubing.

RATCHETING  METAL TUBING CUTTERS

For 1/8” to 5/8” and 1/8” to 1-1/8” O.D. tubing.
 

ADJUST-O-MATIC™ METAL TUBING CUTTERS

For 3/8” to 2-5/8” and 2” to 4-1/8” O.D. tubing.

144-F IMPERIALฎ METAL TUBE CUTTER SERVICE CENTER

For 1/8” to 4-1/8” O.D. tubing. Selling Imperialฎ replacement cutter wheels, reamer blades and fasteners
is easy. Our Service Center organizes a popular selection of replacement parts
for Imperial cutters. Display on the counter or bring it with you when making
sales calls.
• 15 most common replacement parts stocked in one handy container.
• Includes a visual replacement chart for quick and easy identification.

   
Cutters

for

Plastic

 

         
Hose & Tubing Cutter
Part No. HTC
 Special V-block design with easy adjustable blade ensures a straight, clean cut
 Minimal flattening of hose/tubing during cutting - Straight, square cut enhances fitting retention
 Cuts up to 1" O.D. hose or tubing (Non-wire reinforced thermoplastic hose and tubing and
rubber hose and tubing)
  Replacement blades: HTC-RB
Plastic Tube Cutter
Part No. PTC
Razor-edged tube cutter
Closes automatically, assuring clean and square cuts
 May be used with most plastic tubing up to 5/8" I.D.
Description Part Number
Replacement Blades......................PTC-001-RB
PLASTIC TUBE AND HOSE SHEARS

For 1/16” to 13/16” (1 mm to 20 mm) O.D. hose* or tubing.

ADJUST-O-MATIC™ PVC PIPE CUTTER

206-FBP Cuts schedule 40 PVC pipe up to 2”. Ratchet feed mechanism speeds up cutting
operation. Includes one cutter wheel for PVC S10000770 and one general purpose cutter wheel S74761.

         
Benders
470-FH TRIPLE HEAD 180ฐ TUBE BENDER WITH ROTO-LOK™ INDEXING HANDLE

• Bends 3/16”, 1/4”, 5/16” and 3/8” O.D. tubing.
• Patented, quick-action indexing lever repositions two-stage handle midway through
bend when both handles begin to meet. This feature allows easy fabrication of
bends up to 180ฐ with reduced effort, better control and no crossing of handles!
• Optimum bending radius – for each tubing size.
• Calibrated markings – for making accurate left-hand, right-hand and offset bends.
• Compact design for working in tight spaces.
• Cushion grips – for comfort and stability.
• Made of lightweight, die-cast aluminum.
• Clamshell packaging available.

370-FH TRIPLE HEAD 180ฐ TUBE BENDER

Bends 3/16”, 1/4”, 3/8” and 1/2” tubing.
• Makes smooth, tight-radius 180ฐ bends.
• Calibrated markings - for making accurate left-hand, right-hand and
offset bends.
• Adjustable hook.
• Optimum bending radius - for each tubing size.
• Cushion grips - for extreme comfort.
• Made of lightweight die-cast aluminum.
• Clamshell packaging available
.

364-FHA LEVER TYPE TUBE BENDERS

Each tool bends one size. Open-side type which slips over tube at any point. Makes
smooth, tight radius bends up to 180ฐ with minimum effort. No scoring or flattening
of tubing. Calibrated to show angle of bend. Wide hook grips tubing securely.
For 1/8” to 1” and 6 mm to 12 mm O.D. tubing.

364-FHB SWIVEL HANDLE TUBE BENDERS

The 364-FHB series has a swivel handle that can be repositioned midway through
a bend when both handles begin to meet. This simple feature allows easy fabrication of
bends up to 180ฐ with reduced effort, better control and without the crossing of handles,
typical of most other lever type benders.
For 1/4” to 1/2” and 6 mm to 12 mm O.D. tubing.

664-FH HEAVY-DUTY 180ฐ TUBE BENDER WITH ROTO-LOK™ INDEXING HANDLE FOR TIGHT RADIUS BENDS For 1/4” to 1/2” and 6 mm to 12 mm O.D. tubing.

• New design for accurate and tight bends up to 180˚ in stainless steel and other tough metals.
• Patented, quick action trigger release repositions two-stage handle midway through a
bend when both handles begin to meet. This feature allows easy fabrication of optimized
bends up to 180˚ with reduced effort, better control and no crossing of handles!
• Rollers in bending handle reduce friction and bending effort; eliminate scoring of tubing.
• Patented ergonomic grips.
• Durable nickel finish.
• Vise lug for mounting in vise.
• Clamshell packaging available for 1/4” and 3/8” O.D. models.
For 1/4” to 1/2” and 6 mm to 12 mm O.D. tubing.

564-FH AND 564-FHT LEVER TYPE HEAVY-DUTY TUBE BENDERS For 3/8” and 1/2” O.D. tubing.

These heavy-duty tube benders feature high-strength tool steel construction on all components subjected to stress
during the bending process – including forming rollers, form wheel, stop pins, hook and cam adjustment shaft.
Unique offset handle design assures maximum power transfer between worker and bender. Bender will not
“gyrate” as handles are brought to closed position.
• Meets ANSI B31.1/ASME Sec. 3 Boiler/Power requirements (FH Models only).
• Vise mountable.
• Prevents slippage and flattening.
• Fully adjustable to compensate for variances in tube tolerance.
• Starts with handles at 90ฐ angle.
• Built for rugged day-in and day-out use.
• Precise bends!
• Self-aligning rollers eliminate scoring and reduce bending effort.

For 1/4” to 7/8” O.D. tubing.
WIDE RANGE TUBE BENDER KITS

Each tool quickly adapts to all sizes in its range by changing forming wheel and block.
Telescopic handles reposition during bend for best leverage. Calibrations show precise
bend angle. One-piece benders furnished for 1/4” and 5/16” O.D. sizes.
Includes metal tool case with space for other tools needed on the job. Conforms to Federal Specification GGG-B-191a Type III, Class 1.

270-F GEAR TYPE TUBE BENDER For 3/8” to 1-1/8” O.D. tubing.

For all bending work. Spur-gear type with 10-to-1 ratio for easy bending of tempered tubing. Floating shoe aligns tube perfectly on calibrated forming wheel. Pull-pin on
wheel speeds repositioning for bends over 90ฐ. Portable. Can be hand held, clamped in
vise or bolted to bench. Adapts to pipe vise with handle 271-F.

WORM GEAR TUBE BENDER For 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4” O.D. tubing.

Precision tool for highest quality work. 50-to-1 gear
ratio and crank with revolving hand grip keeps effort at a
minimum. Follow bar eliminates drawing action and
keeps tube in virtually perfect round. Adjustable pressure
roller positions quickly in index holes. Enclosed gears.
Includes metal tool case. Can be clamped in vise or bolted
to bench or tripod. Size of kit: 14” x 9” x 6”. Wt. 35.0 lbs.

Flaring
45ฐ FLARING TOOLS For 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2” and 5/8” O.D. tubing.

195-FC Flares 7 sizes of tubing. Rugged forged steel slip-on yoke and
hardened flaring bar. Positive clamping action of bars
prevents tube slippage. Self-centering yoke with swivel-type,
hardened steel, chrome finished flaring cone forms better flares
with less effort. Design of yoke permits flaring where there is
little space between nut and tube end. Satin finish nickel chrome
plated. Wt. 2.0 lbs.
296-FC Flares 7 sizes of tubing. Economical, fast-operating tool. Quick
slip-on yoke. Easy operating swivel-type, hardened steel,
chrome finished cone assures smooth flares. Chrome and black finish. Wt. 1.75 lbs.

45ฐ LARGE SIZE FLARING TOOLS

Flares larger tube sizes. Quick slip-on yoke with hardened steel, chrome finished swivel
flaring cone reduces effort. Positive clamping action of flaring bar eliminates tube movement. Nickel chrome finish. Conforms to Federal Specification GGG-F-451a Type 1, Class 2. Style A.

103-FS For sizes 3/4”, 7/8” and 1” O.D. tubing. Wt. 3.75 lbs.
203-FA For sizes 5/8”, 3/4”, 7/8” and 1-1/8” O.D. tubing. Wt. 3.75 lbs.
375-FS For sizes 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8”
and 3/4” O.D. tubing. Includes tool case. Wt. 3.75 lbs.
376-FS For sizes 1/2”, 5/8”, and 3/4” O.D. tubing. Wt. 2.0 lbs.

HI-DUTYฎ 45ฐ FLARING TOOL For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.

300-FB Hardened steel, chrome finished cone makes exceptionally smooth, high strength flares
with a radius at base of flare – instead of the sharp angle formed by ordinary
tools. Slip-on yoke permits use in tight quarters, allows flaring where there
is little space between nut and tube end. New feed screw design provides
smoother, easier operation. Positive gripping and self-gauging of tube for exact
flare size. Sliding die blocks lock in place by lever clamp action to ensure even
dispersal of force around full diameter of tube for superior grip. Wt. 1.6 lbs.

45ฐ ROL-AIR™ FLARING TOOL Flares and burnishes 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.

500-FC Faceted, hardened steel, chrome finished cone rolls out perfect 45ฐ flares above die block,
and automatically burnishes flare face reducing the need for deburring. Original wall
thickness is maintained at base of flare. Slip-on yoke permits use in tight quarters,
where there is little space between nut and tube end. Larger handle, with better leverage,
and precision threads on feed screw make flaring effortless. Heat treated dies grip tubing
without scoring. Satin chrome and black finish. Wt. 1.5 lbs.
Flares and burnishes 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
 

45ฐ DOUBLE FLARING TOOL For 3/16”, 1/4”, 5/16”, 3/8” and 1/2” O.D. tubing.

93-FB Recommended for Bundy and other annealed soft steel tubing (wall
thickness to .035”). Also makes single or double flares in soft copper or
aluminum tubing. Small, lightweight, easy to handle. Steel yoke;
swivel-type hardened steel, chrome finished flaring cone. Bar provides positive grip of tubing. Includes tool case. Wt. 3.0 lbs.

37ฐ FLARING TOOL For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.

437-FB For use with soft copper, aluminum and brass tubing. Hardened steel, chrome finished
cone makes exceptionally smooth, high-strength flares with a radius at base of
flare – instead of the sharp angle formed by ordinary tools. Slip-on yoke permits
use in tight quarters, allows flaring where there is little space between nut and tube
end. New feed screw design provides smooth, easier operation. Positive gripping and
self-gauging of tube for exact flare size. Sliding die blocks lock in place by clamp action. Satin chrome and black finish. Wt. 1.75 lbs.

37ฐ ROL-AIR™ FLARING TOOLS For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.

400-F Forms 37ฐ flares to government specifications in steel, stainless steel (including
MIL-T-6845), titanium and other metal tubing. Positive stop gauge assures
correct size of flare. Special burnishing action polishes flare face. Three rollers
in flaring cone roll out 37ฐ flare above die block. Roller action cuts effort
required; maintains original wall thickness - eliminates stress concentration.
Extension on yoke for clamping in vise. Satin chrome and black finish.
Includes tool case. Wt. 2.5 lbs.
401-FA Reaming yoke for 1/4” to 5/8” O.D. tubing. Recommended for use with steel
and stainless steel tubing for proper flaring. Wt. 0.7 lbs.
402-FA Flaring and reaming kit. Contains No. 400-F Flaring Tool and No. 401-FA
Reaming Yoke for 1/4” to 5/8” O.D. tubing. Includes tool case. Wt. 3.2 Ibs

LARGE SIZE 37ฐ ROL-AIR™ FLARING TOOLS For 3/4”, 7/8”, 1”, 1-1/4”, 1-1/2” and 2” O.D. tubing

Three cylinders in flaring cone roll out 37ฐ flare above die block. Flares soft steel, copper, aluminum
and fully annealed stainless steel tubing. Roller action reduces effort required; maintains original wall
thickness; eliminates stress concentration. Feed release and burnishing action. Vise clamp
extension on yoke. Heat treated dies clamp tubing without marking it. Satin chrome and black
finish. Includes metal tool case.
537-F Flares and burnishes 3/4”, 7/8”, 1” and 1-1/4” O.D. tubing.
Wt. 13.0 lbs.
637-F Flares and burnishes 1-1/4”, 1-1/2” and 2” O.D. tubing.
Wt. 13.0 lbs.
 

37ฐ PRECISION FLARING TOOL For 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4”, 1”,
1-1/4” and 1-1/2’’ O.D. tubing.
 

407-FA Precision tool flares (37ฐ) 1/8 hard stainless steel and other tubing to
extremely close tolerances. Swivel-head clamp locks tubing in smooth-bore
die blocks. Lathe-type tube feed. Flares rolled out by ball-bearing mounted
concentric flaring cone. Tool must be clamped in vise. Includes metal tool case.
Wt. 50.0 lbs.
Facing and deburring attachments not included with 407-FA.
407-F Includes the 407-FA, plus these facing and deburring attachments:
S74460 Internal deburring tool for 1/8” to 1/2” O.D. tubing.
S74455 Internal deburring tool for 5/8” to 1-1/2” O.D. tubing.

Flaring

&

Swaging

             
45ฐ & 37ฐ PRODUCTION FLARING AND SWAGING TOOL For 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
45ฐ & 37ฐ

555-FS Flares and swages 6 sizes of soft copper, aluminum or brass tubing. Makes both 45ฐ
and 37ฐ single flares. Fast cam lever operation. Portable. Can be clamped in vise or
bolted to bench. Change sizes quickly. Built in gauge for accurate flare size or swage
depth. Unique jaws provide a positive non-slip grip on tubing. Wt. 6.5 lb
s.

FLARING (45ฐ) & SWAGING TOOL For 1/8” to 3/4” (4 mm to 22 mm) O.D. tubing.

275-FS Flares and swages. Converts quickly. Screw-type feed. Ideal for use in close
quarters. Two bars included cover 9 sizes. Swivel-type swaging adapters and
flaring cone are hardened steel, chrome finished for easy operation.
Self-centering, slip-on forged steel yoke. Includes tool case. Wt. 3.5 Ibs.
Flares 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” and 3/4” O.D.
Includes 5 swage adapters for 7 tube sizes: 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” O.D.

             
Swaging              
175-EX XPANDR™ SWAGING/EXPANDING KIT

• Easily expands tube for braze or soldered joints in seconds.
• Floating jaw head design is self-centering for fast, accurate alignment.
• Re-rounds deformed tube ends.
• Accurate joints in seconds without using fittings.
• For soft copper and soft thin wall steel and stainless steel tubing.
• Save 60-70% of time over conventional swaging tools.
• Reduces soldering by 50% over standard fittings.
• Meets ARI tube insertion recommendations.
• Long life with high alloy hardened steel jaw segments.
• XpandR™ Tool comes with non-slip, ergonomically designed grips. • Includes 5 heads: 3/8”, 1/2”, 5/8”, 3/4” and 7/8”. • Includes metal tool case

PUNCH TYPE SWAGING TOOLS
Use these tools for making tubing connections without fittings. Enlarge end of tube,
insert another tube of original O.D. size and solder together like a sweat fitting.
94-SSP 3-in-1 swaging tool for 1/2”, 5/8” and 7/8” tubing. Wt. 1.0 lbs.
95-S 6-in-1 swaging tool for 3/16”, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” O.D. tubing.
Hi-alloy steel, heat-treated for rugged use.
Hex design for ease of extraction.
Precision machined surface for ease of forming.
193-S Vinyl case contains 4 swaging punches for 1/4”, 3/8”, 1/2”
and 5/8” O.D. tubing. Wt. 1.0 lbs.
195-SA Vise-mountable flaring bar and 4 swaging punches for 1/4”,
3/8”, 1/2” and 5/8” O.D. tubing. Includes metal tool case. Wt. 2.0 Ibs. S75531 Flaring bar only. Wt. 1.0 Ib.
             
Deburring              
DEBURRING TOOL

210-F The rotary style blade is perfect for removing burrs from holes and edges. Large
ergonomic handle reduces user fatigue. Ships complete with two heavy duty
blades - extra blade stores inside the handle. For copper, steel, aluminum, zinc,
cast iron, brass and plastic tubing. Length 5-3/4”. Wt. 1.5 oz.

INNER-OUTER REAMING AND DEBURRING TOOLS For 3/16” to 1-1/2” (5 mm to 38 mm) O.D. tubing.

Reams both inside and outside edges of tube at a 60ฐ included angle with 3 hardened cutting
blades. Tough die cast body. Deburrs both clockwise and counterclockwise. Fluted body is shaped
to fit comfortably in palm.
208-F Reamer for copper, aluminum and brass tubing. Hardened steel cutter blades.
Blue finish. Wt. .63 lbs.
208-FSS Reamer for aircraft grade stainless steel tubing, hard or soft copper, aluminum,
brass and steel tubing. Tungsten hardened tool steel cutter blades. Black finish. Wt. .63 lbs.